How to prevent pests and diseases in multi-span intelligent greenhouses?

Dec 30, 2022

Leave a message

How to prevent pests and diseases in multi-span intelligent greenhouses?
The factors of pests and diseases in greenhouses are basically caused by high temperature, high humidity and diseases in the soil, and the same is true for this multi-span greenhouse. From the perspective of prevention and control, multi-span greenhouses are relatively good at controlling indoor environmental factors. Because the most basic environmental factor control facilities in multi-span greenhouses can control factors such as light entering the greenhouse, high temperature in summer, supplementary light, humidity, etc., that is, to reduce the occurrence of pests and diseases in multi-span greenhouses.
temperature and humidity

How to control the humidity in multi-span greenhouse

The factor of high humidity in the greenhouse is nothing more than a very large relationship with the amount of irrigation water and the irrigation method. To solve the problem of humidity in multi-span greenhouses, we need to start from the irrigation method and planting method. For the drip irrigation mode under the plastic film, the simple understanding is that the drip irrigation system needs to be laid under the plastic film, which can not only solve the problem of irrigation water consumption. The mulch film can also reduce the evaporation of water from the soil, so that the humidity in the greenhouse will be reduced. Another point is the problem of ventilation and humidity removal in the main greenhouse, while the multi-span greenhouse has vents on the top, which is very conducive to the discharge of high-temperature and humid air. At this point, it is necessary to popularize science, because the high-temperature and high-humidity air is at the top of the greenhouse. Since the cold air is relatively heavy, if it enters through the top vents, the high-temperature and high-humidity air will be discharged.

Greenhouse wet curtain cooling

How to solve the high temperature in multi-span greenhouse?

For multi-span greenhouses, the high temperature is nothing more than summer. Because the ambient temperature in summer itself is relatively high, and the covering materials of the multi-span greenhouse itself are basically solar panels or tempered glass, which have very high light transmission, which means that they cause high temperatures in the greenhouse. However, the configuration of the multi-span greenhouse is still relatively high-end. The external shading net on the top can reduce the light intensity entering the greenhouse and reduce the indoor temperature. However, if the multi-span greenhouse wants to solve the high temperature indoors in summer, the key is to rely on the fan wet curtain system. Its operation can reduce the temperature in the greenhouse by about 5 degrees, and basically maintain the temperature in the greenhouse at about 28 degrees. For such a temperature situation, it is basically suitable for the growth of most crops. However, the temperature control facilities for multi-span greenhouses in summer are still very sound. In practice, the operators need to carefully control the temperature, and there is a gap in the cooling effect.

soil pests

Prevention of soil pests and diseases in multi-span greenhouses?

In the entire industry of growing vegetables in greenhouses, the most common is the pests and diseases of greenhouse soil. For the prevention of soil pests and diseases in this greenhouse, it can be roughly divided into three forms: circular crop planting, soil stewed shed disinfection and soil drug disinfection. For the prevention of soil diseases and insect pests in the whole greenhouse soil planting vegetables, these three forms are basically adopted.

cycle planting

cycle cropping

The most taboo of planting crops in the soil is heavy cropping, which has the greatest probability of causing crop diseases or yield reduction. But now for multi-span greenhouses, for better economic profit. It is very common for such continuous planting of the same species, and it is very simple to solve the problems of diseases and insect pests caused by repeated cropping. That is to plant several crops in a cycle, and the soil in the greenhouse will be gradually resolved. Although this method is simple, many planting friends do not want to do it, and it will cause certain economic losses.

Stew shed disinfection

Soil stewing shed disinfection

The way of disinfection of greenhouse soil is currently the most widely used mode in the entire greenhouse planting industry. Because its disinfection effect is very good, the cost of the whole process is relatively low, and the operation is relatively simple. The disadvantage is that it should be carried out in the high temperature season of summer, because the principle of disinfection is to use high temperature to eliminate diseases and insect pests in the soil. The damage to the soil is also very small, and the traditional solar greenhouse heating is very fond of adopting this method. However, soil disinfection can also be carried out in this way in multi-span greenhouses, and the operation process is the same. Sprinkle an appropriate amount of lime nitrogen into the soil, plow the soil deeply, inject an appropriate amount of water, then cover it with the ground, and finally seal the greenhouse. It takes about 15-20 days to basically complete the disinfection and sterilization of the soil.

Soil Drug Disinfection

chemical soil disinfection

It is the simplest way to sterilize the soil with chemicals. It just needs to be diluted in a certain proportion according to the relevant configuration instructions, and then sprayed on the soil in the greenhouse. It is also possible to use it once in a while for the soil disinfection of chemicals, and long-term use will make the bacteria in the soil develop drug resistance. Not only will the soil not be disinfected, but it will also cause soil compaction or saline-alkalinity. In addition, it is worth noting that chemical residues in the soil will affect the growth quality of crops and cause certain soil chemical pollution.

Summary: The prevention of soil pests and diseases in multi-span greenhouses mainly starts with the prevention and control of soil pests and diseases in the greenhouse, and then controls the temperature and humidity of the growth environment during crop planting operations. In an environment of high temperature and high humidity, it is very easy to cause the occurrence of diseases and insect pests. In short, if you want to control the occurrence of pests and diseases in multi-span greenhouses, you need to proceed from the above three aspects.

Send Inquiry