How To Choose Greenhouse Steel Frame Material?

how to choose greenhouse steel frame material?

How to choose greenhouse materials, to have the best cost performance?

In recent years, with the development of science and technology and the gradual normalization of the greenhouse industry, more and more people have higher and higher grade requirements for greenhouses.

Here, I will tell you about the specific structure of the solar panel greenhouse and some materials that need to be used, as well as the benefits of the solar panel greenhouse.

A solar panel greenhouse generally consists of a main frame and a sub-frame, covering materials, and greenhouse equipment.

1. The main frame is generally composed of a steel frame. Here, the weight of a covering material and the local snow load and wind load need to be considered. Therefore, the load-bearing problem of the frame has become a must when we design the greenhouse.

2. Covering materials in the greenhouse industry are generally divided into film, glass and sunlight panels. Relatively speaking, plastic film greenhouses are the cheapest greenhouses, and the price is cheap, but in terms of quality and the protection of greenhouse plants, the effect is not very good, and the service life is short, and it must take 3 years. have to change.

3. The glass greenhouse is the greenhouse with the best light transmittance, and the effect of thermal insulation is not very good. Similarly, the weight of the glass is also a problem to be considered. When choosing to use glass as the covering material, the cost of the skeleton will inevitably increase, and the later maintenance cost of the glass greenhouse is quite high. Of course, the safety issue is the top priority of the glass greenhouse.

4. For PC solar panel greenhouses, the transmittance is generally above 80%. Many people may not be familiar with PC solar panels. In fact, when solar panels appeared as a new type of greenhouse material, it undoubtedly brought an impact to the industry. However, the effect is obvious. Yuyang PC solar panels are indeed suitable for use in the greenhouse industry. They are light in weight, easy to install, and easy to maintain in the later period. At the same time, plus the service life of more than ten years, the average annual cost is very low.